A simple outline around a picture can make the difference between “looks good” and “looks great”.
The BIG frame up
We needed some big impact in our living room. I mean, BIG. We found this oversized abstract wall art from West Elm. At seven foot tall, it had the presence we needed for our 18 foot wall. The West Elm wall art looked good but I knew it could look great. On a white wall the art didn’t pop. What it needed was a big outline on that big white wall. It needed a frame. A simple project with a lot of impact.
WHAT YOU’LL NEED
Poplar wood – Poplar wood is a good affordable choice because it typically has a straight, uniform grain which is good for staining. Choose a size that proportionately fits the canvas. For my large canvas I used 1 x 3 poplar.
Miter box and saw
Wood stain, polyurethane, steel wool and disposable foam brushes
Panel nails and hammer
Measure the length you will need for the top, bottom and sides. Measure each separately. Each sided may be slightly different.
Cut each piece with a miter box at a 45 degree angle. Make sure you cut the angles correctly. It’s easy to have a dyslexic moment and cut the angles wrong.
Mark the ends of each piece top, bottom, left and right. This will be helpful when putting the frame together. Stain both sides of each piece. After the stain has dried coat both sides of each piece with polyurethane. Three coats should be enough. Between coats lightly sand with steel wool to smooth the grain.
Lining up the mitered corners, nail each piece directly into the sides of the canvas.
Now our seven foot canvas is the focus on the wall instead of blending into the wall.
With a nod to her past, a designer uses reclaimed mushroom wood as an accent to a modern kitchen.
Who claims fame for reclaimed?
When my father chose used bricks for the foyer and fireplace of his custom built home in South Jersey, even then, I thought… that’s cool. There were other materials in the house that were “reclaimed” or salvaged. The desk suspended from ships’ chains, railroad tie beams on the ceiling and a penny gum ball machine in the family room. They were all curiosities.
John had a vision when he built the house. It would be a grey weathered New England saltbox. Maybe he wanted to bring a little bit of his New England roots to the Jersey shore. No aluminum siding here. The house was clad in cedar siding. Cedar very quickly weathers to a smokey grey as if being battered from years of weather’s storms. However, I’m quite certain that if reclaimed cedar siding had been available back then to achieve his vision, he would have used it.
The family home: A New England saltbox at the Jersey shore
Low maintenance and eco friendly moss covered yard.
Sustainable and eco friendly?
A natural landscape was chosen to complete the look. Or more simply, it had no lawn. Why? Was it because it was sustainable? Or eco friendly? Not a chance. He had no use for a lawn. To him, spending hours maintaining a lawn involved giving up too much valuable free time. So eventually, the yard turned into a low maintenance and eco friendly mossy carpet nestled in a neighborhood full of manicured suburban lawns.
John was certainly no conservationist. And he wasn’t trying to be trendy. However, he did have an unrealized creative side and a spirit to do things differently.
Recently, we renovated our kitchen with modern glossy white cabinets. But too much of a good thing can be, well, just too much of a good thing. Our modern glossy cabinets begged for a complimentary natural accent. The back of the counter bar peninsula was a perfect place to add a touch of something organic. Afterall, opposites attract in both design and dating.
I scoured the internet searching for reclaimed wood. You’ve seen it. Every trendy restaurant now has reclaimed wood decor. But finding it for my small project was near impossible. After a multitude of unsuccessful searches, I finally found a local supplier of reclaimed wood. Provenance Mill Works in Philadelphia is an amazing treasure trove of reclaimed wood and salvaged objects. There, I discovered mushroom wood. Reclaimed from commercial mushroom planting beds, enzymes erode the grain which produces sculpted canyons in the wood. It’s affordable, sustainable and never needs treating. And since mushroom farmers regularly replace bins the supply is endless.
Zoe photo bombing the uninstalled mushroom wood.
Don’t forget the LED tape lights
My claim of reclaimed
Once I decided to used reclaimed mushroom wood as an accent in our kitchen I couldn’t give myself THAT much credit. Afterall, haven’t many have gone there before? Many, including my father, used reclaimed before it became trendy. It’s always been a vehicle for adding a little bit of soul where non exists. Be it because of economic necessity, the desire to be closer to nature, or just our past, reclaimed materials will always intrigue people. But for me, I smiled to myself, thought of my dad, remembering him doing things a just a little bit differently.
Inspired by Frank Lloyd Wright’s Fallingwater, this DIY project brings ecologically friendly stacked stone as a natural element indoors.
In Fallingwater Wright captured the perfect essence of our desire to live with nature, to dwell in a forested place and be at home in the natural world.
– Edgar Kaufmann, Jr.
Organic, it’s not just about food.
If you’re familiar with Frank Lloyd Wright’s Fallingwater in Mill Run, PA, then you know he designed the Kaufmanns vacation home with the idea of bringing the outdoors in. The Kaufmanns, who lived in Pittsburgh, were the well-to-do owners of Kauffmann’s Department Store. Their property along the Bear Run stream was their summer escape from what was then called the “Smokey City”.
A building should grace its environment rather than disgrace it.
– Frank Lloyd Wright, Hugh Downs interview, 1952
Fallingwater, or the Edgar J. Kaufman House, was constructed from 1936-1938. What makes it so special is that it was is built over a 30 foot waterfall. The house lives IN nature. Wright designed a home that is not only an architectural masterpiece but an engineering marvel as well. His “organic architecture” combines with cantilevered terraces that jut out over the falls, creating strong horizontal planes reminiscent of the surrounding landscape. Native stone is used on floors and vertical supports. Horizontal components are poured concrete. And adding warmth is sap grain walnut throughout. The conscious use of materials from nature bring the outside in.
I visited Fallingwater while on a road trip to Pittsburgh a while back. I’ve wanted to return ever since. I want to remind myself of the design details which make this home a modern icon. A modern icon that beautifully balances the sleek lines of modern design without giving up the warmth of nature.
Mill Run is located between Philadelphia and Pittsburgh. It’s about a 4-5 hour drive from Philadelphia. It’s worth the visit.
Bringing my outside in.
I knew I wanted to bring natural components into our modern space. Modern spaces can quickly become cold. So it was obvious this white support column between the living room and dining room would be perfect covered in stone.
It didn’t occur to me I was borrowing from Fallingwater.
Earth friendly organic architecture
I live in a condominium. Unlike Mr. Wright, I didn’t have natural field stone lying around to face my column. Even if I did, I’d be crazier than I already am if I’d even considered using it. Real stone is heavy. That includes the pre-made staggered stone panels. All more than I was willing to tackle. Eventually, I found Native Go-Stone sold through Home Depot. It’s lightweight and made from 87% recycled material. Here’s how I installed it.
WHAT YOU’LL NEED
Native Go-Stone panels sold through Home Depot. – Flat panels and corner pieces as needed. They can be ordered online and delivered to your home. Be aware. I received a few boxes with broken pieces. Don’t panic if you do too. With all the cutting required to cover my column the broken pieces were all usable.
Trowel and AcrylPro tile adhesive
Shims, painters tape and rosin paper
Ear, eye and face protection
Angle grinder, blades and a level
Recommended: portable work table with clamping capabilities
Before starting, make sure to protect your floors surrounding your work area. Rosin paper is inexpensive and works very well. It can be taped down with painters’ tape. Fold it up and toss it out when you’re done for the day. Yes, if you have lots of cutting to do this will take longer than a day.
Cut marks can be made with a pencil. Where eye, ear and face protection when cutting. You’ll also want to do this outdoors. There is a lot of dust and debris left after cutting.
NOTE: According to Go-Stone this material can be cut with a drywall saw. That’s sort of true. I wore out three drywall saw blades before I’d had enough. Go out and buy an inexpensive angle grinder. It’s worth the $40 to save your sanity and everyone’s around you.
Start at the bottom (starting at a corner if applicable) and dry fit panels before applying tile adhesive. There are three different size panels, plus corners if you’re using them. Stagger the panels. You want to reduce the appearance of seams.
Generously apply tile adhesive in a criss cross pattern to the stones. Adhere the tiles wiggling them a bit to ensure the adhesive coats thoroughly.
Once you’ve set a row of stones, check to make sure they are level. If not, level the stones with shims. Continue stacking the stones and leveling until you are done.
The finished column. I couldn’t be happier. What do you think?
We bought this Mid-Century Modern modular shelving unit from the estate of the previous owner. It’s well-built, stylish AND practical. The rails are aluminum. The drawers are solid wood. The doors have rattan inserts. And, there’s lots of storage. I’m not a fan of clutter. I’m a fan of hiding clutter. I hide the dog toys in the bottom drawer on the left.
Our predecessor had the shelving unit upstairs. In order to move it downstairs to the living room it had to be taken apart and reassembled. “Modular” was not the word I used to describe the unit while moving it.
I scrubbed 30 years of nicotine off the shelves. Polished the aluminum support rails. And then, went off to the hardware store to find binder screws to assemble the unit. Half of the binder screws were missing. The holes in the rails needed to line up perfectly with the holes in the cabinets in order to put the shelves together. Another two person job. The project that I said, was at best, 1-2 hours, took the entire day. Funny, that happens a lot.
Great! Love it… except. It looks underwhelming.
The shelves required some drama to show them off. At night, against an 18 foot wall, the shelves visually melted into the room. But with minimal cost and effort. And by adding background lights. The shelves now look rich and sophisticated.
Not too hot. And not too cold.
Lighting is an important component of design. Lighting design professionals understand the art and science of lighting. It can be used to create drama and add dimension. Retailers, designers and directors all use lighting to connect with audiences.
With lighting, knowing color temperature is important. Do you ever wonder why you look so bad under fluorescent lights? It’s because the least flattering light for your face is blueish light. It’s color temperature is cold. Fluorescent lights emit bluish/green light. This makes your skin tone look sickly and pale. This is useful information for your next selfie.
If you want to understand about the art and science of lighting, visit Lowel.
Drama, in the right places.
For this project, I used LED tape lights from LED Wholesalers. I taped the LED lights to the back of the shelving unit. They are 12 volt DC, 24 watt, warm white with a color temperature of 2700K. Warm lighting is a good choice for home lighting. It feels natural and comfortable.
These lights are cuttable, dimmable and have an adhesive back. They required a power adapter and connectors as needed. A touch sensitive dimmer switch is optional.
LED lights have come a long way in recent years. Partly due to the phasing out of incandescent bulbs. I recommend changing to LEDs throughout your home. You’ll save money, save the environment AND you can still look good. LEDs are affordable (they keep going down in price) and are readily available in warm white 2700K.
LED 12 volt DC, 24 watt, warm white tape lights with a color temperature of 2700K and scissors.
Power adapter, connector and optional touch sensitive dimmer switch.
Tape lights come in different lengths. These lights can be cut with scissors every two inches for custom sizing. A variety of connectors can be added for different situations.
Peel off tape backing and stick in place.
Connect to connector or connectors.
Plug into the power adapter.
Plug into an outlet.
Optional: Connect the power adapter to a touch sensitive dimmer switch.
I love the way this turned out. This media unit needed a little help. The LED tape lights also compliment the two LED lamps.
In case you don’t know, Iris Apfel is 93 years young. And, she is beautiful. Every wrinkle and gray hair radiates the depth of her style. She represents, for me, authenticity and connectedness to what is real. She reminds me of what I miss. The familiar glasses, the silver hair and lip stick. She reminds me of my mother. And she reminds me of the style and character of a generation unplugged.
In my view you can’t go to the future if you haven’t come from the past. — Iris Apfel
How do we create?
It’s been three days since I saw the movie “Iris” and for three days Iris Apfel has been on my mind. There is no doubt Iris Apfel is talented. It’s refreshing to see her connect the dots of design while unencumbered by brand influence or ego. And invigorating to watch the “geriatric starlet’s” mind gather her components to create. She has a sense of self so rich you can’t help but fall in love with her.
Iris Apfel isn’t new or fleeting. To be defined by media then tossed aside. No, her bountiful curiosity has enriched her wardrobe and us. Her body is her canvas. Her age is irrelevant. Her style can’t be categorized. Her art (yes, it is art) is timeless.
As I watched her work her magic I longed to explore design again without the aid of technology. To let my mind blissfully wonder, unplugged. Did I? No. Can I? Is that today’s luxury? It takes hours of time. The internet has become my avenue of discovery. A quick reward. But the personal reward of natural discovery is so great. It seeps deep into my soul.
To find out who you are is like putting yourself on a psychiatric couch, but you have nobody to help you. Really it isn’t easy. I was talking with my nephew this morning and he gave me one of the best quotes I’ve heard in years ‘Personal style is curiosity about oneself. — Iris Apfel
Looking to the past to create for the future
It’s easy to think every answer can be found on the internet. It can’t be. I can easily get in a rut where I think it can. Sometimes, I simply forget that answers come to me when I let my ideas “stew” or through natural exploration. A valuable takeaway from a movie. Looking backward, discovering where I came from, why I am who I am, exploring and connecting. The essential components of self-awareness and creativity.
I just got pinged from my friend Joann. Do I want to see the documentary “Sagrada: The Mystery of Creation” on Friday night. Barcelona’s La Sagrada Familia designed by Antoni Gaudi and still under construction. We visited Barcelona in 2002. How great it was. Even if it’s virtual, I think I’ll go. To hopefully inject my creative soul with a little more borrowing from the past.
We inherited this chandelier when we bought our house. Nice, but not really our style. I believe in recycle, reuse and “reward” so I posted it on Craigslist. It ended up selling for $280 to a man from Brooklyn, NY. Yes, Brooklyn. He was in the Philadelphia suburban area on a buying sweep. I’m sure it ended up at Brooklyn Flea or in an antiques/collectible shop. But ya know, I often wonder. Who’s living with my stuff now?
Affordable industrial chic chandelier.
Now I needed a new chandelier. I searched for an affordable industrial chic chandelier to accompany our concrete dining room table. Everything was either too modern, too big, over designed or too expensive. Also, I had a unique situation because the outlet box wasn’t centered over the table.
Off center. No problem.
This is the second house I’ve lived in where the position of the dining room chandelier outlet box is in the center of the room. My dining room table is OFF center. So I devise a solution to this problem. And it doesn’t involve an electrician ripping up the ceiling to move the outlet box. By creating my own lighting canopy I was able position the fixture OFF center, hide the pendant wiring AND cover the outlet box.
Light fixtures aren’t complicated. They consist of a bulb, socket and wire. The rest is dressing.
WHAT YOU’LL NEED
3-4 pendant lights
Something to use as a lighting canopy. It should be metal.
Drill and drill bits
Electrical tape and wire connectors
Screws and anchors
Another set of hands
First, I started shopping for affordable pendant lights. I chose these from Lowes. The globes are clear and they have an industrial chic style. Also, light shines down with these pendants. ADVICE:Go with white or clear. I once made the mistake of buying a pendant with an amber colored globe. It was like eating with a bug light hanging over the table.
Next, I had to find a suitable solution for a lighting canopy (the part which houses the wiring). I imagined a metal boot tray. I started scouring the internet. No luck. Then I came across these zinc finish metal trays at Terrain’s website. Perfect! (Terrain is in Glen Mills, PA and Westport, CT. It’s worth a visit just for ideas.) I bought the medium tray. It’s metal, AND the style compliments the pendant fixtures. I had my components so I was ready to start.
First… turn the power off at the breaker box.
This is a two person job.
First, measure the diameter of the pendant. Add to the diameter an allowance of space for the pendants to hang side by side. Drill holes for the pendant cords.
Drilled three additional smaller holes. One to secure the chandelier to the outlet box and two to secure the fixture to the ceiling. Preferably, secure to studs. If not, be sure to use anchors.
Depending on the new position of your fixture, you may secure the lighting canopy to the outlet box with a hole in a different position. But I recommend at least three holes to secure the canopy to the ceiling.
Feed the pendant wire through the pendant light cord holes. Decide on the desired length of the pendant cords. Generally, approximately 30 to 34 inches over a table with an 8foot ceiling height is appropriate. Use a washer and tighten the nut at the desired cord length inside the tray. Then tighten the couplings on the opposite outside. Do this with all the pendants.
Splice the pendants in parallel (you’ll probably want to cut the excess pendant cord) and wire them to the box with electrical tape and wire connectors. You’ll need help with this. One person holding the fixture while the other connects the wires.
While holding the fixture in place, screw the canopy into the outlet box and the remaining two screws into the ceiling anchors.
I recommend Edison bulbs to complete the industrial chic look. They range from $4-10 a bulb. 1000bulbs.com is a good online source for these.
I love how this turned out. The pendant chandelier now hangs centered over the OFF center concrete dining room table.
“I decided that the stock market was not an option for IKEA. I knew that only a long-term perspective could secure our growth plans and I didn’t want IKEA to be become dependent on financial institutions.”
Ingvar Kamprad, Senior Advisor & Founder
I remember in 1985 when IKEA opened its first US store. Wow, its been 30 years. That first store was in Plymouth Meeting, PA. A short distance from my home in Philadelphia. Billboards were posted everywhere announcing the store’s opening. It was an event. For a designer, the idea of affordable readily available Scandinavian furniture and products was a dream come true. Back then, I felt privileged to be living near the first, AND ONLY, US store. IKEA has since outgrown their first US store in Plymouth Meeting, PA. In 2000 the store moved to nearby Conshohocken, PA. But I’m a lucky lady. I work in Conshohocken so I make frequent trips on my commute home.
IKEA has disappointed me with some of their products over the past 30 years, but not many. Early on, lots of products just fell apart. But today, IKEA offers some amazing solutions that are an integral part of our home.
I’d just like to say. Nobody does it better than IKEA. It is truly a remarkable business. And on so many levels. The level I’m going to talk about today is IKEA’s corporate structure. So…
Did you know?
In case you were wondering….
IKEA was started in 1943 by Swedish founder Ingvar Kamprad. It is a private “foundation”. A charitable organization. No stock and no shareholders. But still, it’s amazing to imagine that it’s 31.22 billion dollars in sales In 2014 were achieved without the help of shareholder or investor money.
IKEA’s ownership structure secures it’s long-term future. Because IKEA is a foundation it cannot be sold or split up by heirs.
And it works like this…
The Stichting INGKA Foundation (a private non-profit) based in the Netherlands owns the IKEA Group. The IKEA Group must reinvest funds back into the IKEA Group OR funds must be donated for charitable purposes through the Stichting IKEA Foundation.
The IKEA Group (another private company) franchises the IKEA retail system from Inter IKEA Systems.
Inter IKEA Systems (yes, private)is the owner of the IKEA trademark, concept and the worldwide IKEA franchisers.
The IKEA group of companies
So, is IKEA a non-profit? Clearly it is.
It’s a privately owned charitable foundation dedicated to interior design. By being a charitable foundation IKEA minimizes it’s tax liability. The founder Ivar Kamprad and his family financially benefit from this arrangement. And because IKEA is a private charitable entity it makes it impossible to takeover. IKEA remains intact and immune to tampering from successors.
Rest easy. Or not. IKEA will still be there for your grandchildren.
Zigzoe is very conscience about pennies going out the door. After all, those pennies are also needed for fabulous BYOB dinners in foodie rich Philadelphia.
Threshold Windham Accent Cabinet
I love the pop of color of this storage cabinet. It compliments our modern decor without being too fussy. It could easily swing country too. The cabinet has one adjustable shelf with stylish window pane doors. Target says it’s made of “quality wood materials”. Not exactly sure what that means but I’m certain it doesn’t mean solid wood. That’s OK with me. It’s easy to put together but the best part is it doesn’t LOOK like it’s put together. It has a lacquer like finish and is sturdy enough for our needs. I love the teal blue. Highly recommended.
If teal doesn’t work for you there are nine other colors to choose from. It’s $134.99 when it’s on sale or $149.99 regular price at Target. Yeah, Target!
There are other pieces in the Threshold Windham series if this one doesn’t work for you.
Mad Men is over but Don Draper’s world lives on. We see his living room flipping through the pages of a Crate and Barrel catalog. In artwork inspired by the era at West Elm. At IKEA, the Scandinavian originator of today’s modern functional design. And if we’re lucky enough to afford it, the real deal at Design Within Reach.
What is so appealing about this era in design? FORM FOLLOWS FUNCTION. Not a catch phrase but a practical manifesto for post war Europe and America. While Europe was rebuilding, America was entering an era of manufacturing might. After the hardships of war decorative design elements became frivolous, costly, and time consuming. New techniques in manufacturing introduced the world to new possibilities. Artists began designing with a view towards a modern utopia. Not to decorate and hide, but to reveal the structure within. To make beautiful the materials of manufacturing. Strip everything bare to its simplest forms. Painting became abstract, office buildings exposed their skeleton structures, and furniture became bare of decoration. Ultimately, a simple beauty emerged which remains timeless and still popular today.
Modern design emits hope. Hope in the future. Hope in possibilities. Hope in ideas and invention. The style will never go away and will always continue to evolve.
The simple elegance of this design period plays well with so many other styles. It’s been combined with african art, oriental rugs and global textiles.
We’ve said goodbye to Don Draper and company but we’ll never say goodbye to modern.
To view the entire galley of award winning Mad Men sets at Interior Design click here.